CipherLab 8000 User Manual page 23

 By Individual files, file names are auto-suffixed with a string from "-01" to "-10", which
comes from Batch AG data collecting form numberings.
 Data files are saved into .txt files by default. However file extension is redefinable and
customizable with a few exceptions of illegal symbols and punctuations that should be ruled
out.
 Lookup files are saved into .lku files by default. However file extension is redefinable and
customizable with a few exceptions of illegal symbols and punctuations that should be ruled
out.
Save Mode
Sets how an incoming file is saved.
Normally an incoming file is saved as a new file. However, if an incoming file name is the same as
an existing file name, the incoming file can be set to either overwrite or be appended to the
existing file.
Add Return character to each record.
Adds a Return character to each record entry, which is the default. Change it if necessary.
Add Line-Feed character to each record.
Adds a Line-Feed character to each record entry, which is the default. Change it if necessary.
Log File
Select Enable LOG file to have Remote Console auto-generates a data transmission log that
helps analyze the activities during data transmission.
File Path By default, log files are saved in the same folder where Remote Console is
installed. Browse for somewhere else to save the log files.
Save Mode If the file name is the same as of an existing file, the log file will either overwrite
or be appended to the original file. Otherwise, it will create a new file.
Introduction
19