Change Data File Settings - CipherLab 8000 User Manual

CHANGE DATA FILE SETTINGS

File Properties define where and how an incoming file is stored. To configure File
Properties:
1) From Remote Console menu bar, click System | File Properties. (Note System
menu items are only available when Remote Console service is put to stop.)
A window of the same name opens.
Different transmission interfaces render different File Properties settings provided
on the File Properties window. "Ethernet Cradle IP" and "Ethernet Cradle MAC
Address" are ruled out from file-naming options when the interface isn't TCP/IP.
2) Make settings by referencing the following:
Introduction
17