Operation; Answering A Call; Making An Intercommunicating Call; Self-Start - Elvox 7529 User Manual

Operation

Answering a call

A call from the outdoor entrance panel or
from an intercommunicating device can be
answered during the chime cycle or once it
has ended. To answer, lift the handset; to
end the call, replace the handset.
Receiving a door call
The monitor can receive calls from a door
call button.
When the door call button is pressed, the
monitor emits a different tone to the one
used for outdoor entrance panel calls or
intercommunicating calls. To stop the chime,
lift the handset.

Making an intercommunicating call

To make a call to another indoor unit, one or
more buttons must have been programmed.
To make the call, press the button program­
med for the relevant indoor unit. During
the call, the monitor emits a tone in order
to signal that the call is being made. If the
interphone/monitor is already engaged in
another call, a tone will be heard on the
monitor making the call to indicate that the
user receiving the call is busy.
When the indoor unit receiving the call
answers, communication begins automa­
tically. Replace the handset to end the
conversation.
The maximum conversation time is 5 minu­
tes (default).
Muting the ringtone during a call (Mute
function)
When receiving a call from an outdoor
entrance panel or from an intercommunica­
ting device or a door call via device 6120,
the call ringtone can be muted by pressing
button B.
8
Door lock command
Press the lock button (with the handset
hooked on or in conversation) to send a
lock opening command to the entrance
panel (by default, the last entrance panel to
make a call).

Self-start

­ Self-start with dedicated button (but-
ton A):
to use the self­start function and com­
municate with the master entrance
panel, briefly press button A (self­start)
to turn on the monitor and lift the hand­
set to start the conversation. Replace
the handset to end the conversation.
Calling a porter switchboard
To call a porter switchboard (if present in the
system): lift the handset and press button C
(lock) to make the call.
Hearing aid function (art. 7529/D only)
Art. 7529/D has an internal coil which allows
hearing aid wearers to use the device. In
this operating mode, the hearing aid must
be switched to the "T" position. However, for
correct operation of the hearing aid refer to
its instruction manual.
Note: metal objects or electronic equipment
in the vicinity may affect the quality of the
sound received by the hearing aid.
EN