Figure 13: Console Port Connection; Table 6: Console Cable Wiring - Edge-Core ECS4110-28P Installation Manual

The following table describes the pin assignments used in the console cable.

Table 6: Console Cable Wiring

Switch's RJ-45
Console Port
6 RXD (receive data)
3 TXD (transmit data)
4,5 SGND (signal ground)
No other pins are used.
The serial port's default settings are as follows:
◆
Default Baud rate—115200 bps
◆
Character Size—8 Characters
◆
Parity—None
◆
Stop bit—One
◆
Data bits—8
◆
Flow control—None

Figure 13: Console Port Connection

1
3
1 Switch's Console port.
2 PC's DB-9 COM port.
Null Modem PC's 9-Pin
DTE Port
<--------------------- 3 TXD (transmit data)
---------------------> 2 RXD (receive data)
----------------------- 5 SGND (signal ground)
3 RJ-45 to DB-9 console cable.
– 27 –
Chapter 5
| Switch Management
How to Connect to the Console Port
2