Subscribe to Our Youtube Channel
Related Manuals for Vista 1080BIR35V16e
Summary of Contents for Vista 1080BIR35V16e
- Page 1 VK2-1080BIR35V16e Quick Guide Please read this manual thoroughly before use, and keep it handy for future reference.
-
Page 2: Quick Installation Guide
Quick Installation Guide VK2-1080BIR35V16e Quick guide V1.0... - Page 3 Quick Installation Guide 1. Description This manual applies to the VK2-1080BIR35V16e full HD Bullet camera with IR illumination. • Installation Steps Follow these steps to install the VK2-1080BIR35V16e on your local network (LAN): 1. Check the package contents against the list below.
-
Page 4: Installation
PC, while a direct cable is used for connection to a switch. Micro SD memory slot Remove the front cap of the camera to insert the SD memory card. VK2-1080BIR35V16e Quick guide V1.0... -
Page 5: Network Connection And Ip Assignment
IP address to the device with the “Smart Manager” utility on the CD. The factory default IP is “192.168.30.220”. Connect the VK2-1080BIR35V16e / device to the network and power up. Start SmartManager utility (Start>All programs>SmartManager>SmartManager), the main window will be displayed, after a short while any network devices connected to the network will be displayed in the list. -
Page 6: Operation
3.1 Access from a browser Start a browser (Internet Explorer). Enter the IP address or host name of the VK2-1080BIR35V16e in the Location/Address field of your browser. You will see the following start page. Click Live View or Setup to enter web page. -
Page 7: Access From The Internet
The network camera’s Live View page appears in your browser. 3.2. Access from the internet Access from the internet once connected, the VK2-1080BIR35V16e is accessible on your local network (LAN). To access the VK2-1080BIR35V16e from the Internet you must configure your broadband router to allow incoming data traffic to the network camera. -
Page 8: Live View Page
The live viewer toolbar is available in the web browser page only. It displays the following buttons: The Stop button stops the video stream being played. Pressing the key again toggles the start and stop. The Start button connects to the VK2-1080BIR35V16e or start playing a video stream. -
Page 9: Vk2-1080Bir35V16E Setup
Basic, Live View, Video & Image, Event, and System Configuration. You can configure the VK2-1080BIR35V16e by clicking Setup in the top right-hand corner of the Live View page. Click on this page to access the online help that explains the setup tools When accessing the VK2-1080BIR35V16e for the first time, the “Admin Password”... -
Page 10: Resetting To The Factory Default Settings
>Maintenance web page (described in “3.5.6 System>Maintenance” of the User’s Manual) or use the Reset button on the network camera, as described below: Follow the instructions below to reset the VK2-1080BIR35V16e to the factory default settings using the Reset button. - Page 11 Quick Installation Guide VK2-1080BIR35V16e Quick guide V1.0...
- Page 12 Quick Installation Guide Printed in Korea VK2-1080BIR35V16e Quick guide V1.0...
Need help?
Do you have a question about the 1080BIR35V16e and is the answer not in the manual?
Questions and answers