Vista VK2-HDX23IR-SMW User Manual
  1. Manuals
  2. Brands
  3. Vista Manuals
  4. Security Camera
  5. VK2-HDX23IR-SMW
  6. User manual

Vista VK2-HDX23IR-SMW User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

User Manual
VK2-HDX23IR-SMW
Please read this manual thoroughly before use and keep it handy for future reference.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VK2-HDX23IR-SMW and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Vista VK2-HDX23IR-SMW

Summary of Contents for Vista VK2-HDX23IR-SMW

  • Page 1 User Manual VK2-HDX23IR-SMW Please read this manual thoroughly before use and keep it handy for future reference.
  • Page 2 VK2-HDX23IR-SMW User manual V1.0 Page 2...
  • Page 3 ** This symbol indicates general warnings and cautions. NORBAIN SD reserves the right to make changes to the product and specification of the product from time to time without prior notice. WARNINGS AND CAUTIONS: VK2-HDX23IR-SMW User manual V1.0 Page 3...

  • Page 4: Important Safeguards

    PERSONNEL ONLY. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO. 15. IEC60950-1/UL60950-1 or Certified/Listed Class 2 power source only. VK2-HDX23IR-SMW User manual V1.0 Page 4...

  • Page 5: Table Of Contents

    A Appendix ........................... 94 A.1 Troubleshooting ......................94 A.2 Alarm Connection ......................96 A.3 Preventive Maintenance ....................96 A.4 System Requirement for Web Browser ................. 97 A.5 General Performance Considerations ................97 A.6 Product Specification ..................... 98 VK2-HDX23IR-SMW User manual V1.0 Page 5...

  • Page 6: Introduction

    1) 2-Pin Terminal Block 2) 3-Pin Terminal Block * RJ-45 Waterproof Cover NOTE: Check your package to make sure that you received the complete system, including all components listed above. NOTE: Adaptor for 12VDC is not supplied. VK2-HDX23IR-SMW User manual V1.0 Page 6...

  • Page 7: Key Features

    • Micro-SD Recording support The network camera also supports a Micro-SD memory slot for local recording with removable storage of type SDHC and SDXC. • Audio support The network camera also supports two-way audio. VK2-HDX23IR-SMW User manual V1.0 Page 7...

  • Page 8: Installation

    4. Align the locking tab on the bracket and the locking slot on the base of the dome (Figure D). 5. Turn the dome to the counterclockwise about 10 degree to the locked position (Figure E). 6. Finally secure the small locking screw (Figure E) VK2-HDX23IR-SMW User manual V1.0 Page 8...
  • Page 9 VK2-HDX23IR-SMW User manual V1.0 Page 9...
  • Page 10 If it is too difficult to lock the dome in position after the mounting bracket has been installed readjust the screws “A” by unscrewing them a small amount and try to install dome camera again. VK2-HDX23IR-SMW User manual V1.0 Page 10...

  • Page 11: Basic Configuration Of Dome Camera System

    MIC: AUDIO INPUT 2-PIN TERMINAL BLOCK G: GND SPK: AUDIO OUTPUT 2-PIN TERMINAL BLOCK G: GND The camera must be installed by qualified service personnel in accordance with all local and federal electrical and building codes. VK2-HDX23IR-SMW User manual V1.0 Page 11...

  • Page 12: Resetting To The Factory Default Settings

    6. The network camera resets to factory defaults and restarts after completing the factory reset. 7. Close the Micro-SD card cover tightly to ensure waterproofing. CAUTION: When performing a Factory Reset, you will lose any settings that have been saved. (Default IP 192.168.30.220) VK2-HDX23IR-SMW User manual V1.0 Page 12...

  • Page 13: Connections

    Connect the positive (+) pole to the ‘+’ position and the negative (-) pole to the ‘-’ position. – Be careful not to reverse the polarity when you connect the power cable. – You can also use a router featuring PoE (Power over Ethernet) to supply power to the camera. VK2-HDX23IR-SMW User manual V1.0 Page 13...
  • Page 14 3) Select the camera on the list and click right button of the mouse. You can see the pop-up menu as below. 4) Select Assign IP Address. The Assign IP window will display. Enter the required IP address. NOTE: For more information, refer to the SmartManager User Manual. VK2-HDX23IR-SMW User manual V1.0 Page 14...

  • Page 15: Operation

    2. Enter the IP address or host name of the network camera in the Location/Address field of your browser. 3. You can see a starting page. Click Live View, Playback, or Setup to enter web page. 4. The network cameras Live View page appears in your browser. VK2-HDX23IR-SMW User manual V1.0 Page 15...

  • Page 16: Access From The Internet

    HTTPS connection, please see “System > Security > HTTPS” of User Manual. NOTE: HTTPS (Hypertext Transfer Protocol over SSL) is a protocol used to encrypt the traffic between web browsers and servers. The HTTPS certificate controls the encrypted exchange of information. VK2-HDX23IR-SMW User manual V1.0 Page 16...

  • Page 17: Live View Page

    The preset drop-down list allows you to select the preset number for the PTZ camera being used. This icon is inactivated if the PTZ settings are not set. VK2-HDX23IR-SMW User manual V1.0 Page 17...
  • Page 18 The Live View page in the network camera provides access to H.264, H.265 and Motion JPEG video streams, and to the list of available video streams. Other applications and clients can also access these video streams/images directly, without going via the Live View page. VK2-HDX23IR-SMW User manual V1.0 Page 18...

  • Page 19: Playback

    Fast forward play: play fast forward of the video clip. Go to the last: go to the end of the video clip. Clip copy: copy the video clip. Zoom In: zoom in the video clip. VK2-HDX23IR-SMW User manual V1.0 Page 19...
  • Page 20 If you click Start Date or End Date zone, displays Search Calendar. 8) Event List Window Event List displays the event(s) that were recorded in the SD local storage. Select a list and click the play button. The video clip will be played. VK2-HDX23IR-SMW User manual V1.0 Page 20...

  • Page 21: Network Camera Setup

    NOTE: If the password is lost, the network camera must be reset to the factory default settings. Please see “Resetting to the factory default setting”. 3.6.1 Basic Configuration You can see the device information in this information page. VK2-HDX23IR-SMW User manual V1.0 Page 21...
  • Page 22 • Enable anonymous viewer login: Check the box to use the webcasting features. Refer to “Video & Image > Webcasting” for more details. Please refer to “System > Security > Users” for more details about User setup. VK2-HDX23IR-SMW User manual V1.0 Page 22...
  • Page 23 2. The ARP/Ping service is automatically disabled two minutes after the unit is started, or as soon as an IP address is set. 3. Pinging the unit is still possible when this service is disabled. Please refer to “System > Network > Basic” for more details about Network setup. VK2-HDX23IR-SMW User manual V1.0 Page 23...
  • Page 24 3) Video & Image User can setup and change setting of individual video stream in this page. Please refer to “Video & Image > Basic” for more details about Video & Image setup. VK2-HDX23IR-SMW User manual V1.0 Page 24...
  • Page 25 User can set time directly or assign time server to get the current time, as well as determine Date & Time format in this page. Please refer to “System > Date & Time” for more details about Date & Time setup. VK2-HDX23IR-SMW User manual V1.0 Page 25...
  • Page 26 Constrained Baseline Profile has been defined. * H.264 Baseline Profile: Originally intended as the mainstream consumer profile for broadcast and storage applications, the importance of this profile faded when the High Profile was developed for those applications. VK2-HDX23IR-SMW User manual V1.0 Page 26...
  • Page 27 • Stream 3, Stream 4 Setting: Same as the Stream 1 settings. When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information you entered without saving it. VK2-HDX23IR-SMW User manual V1.0 Page 27...
  • Page 28 - If the camera is taking a picture of a thin horizontal line. When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information you entered without saving it. VK2-HDX23IR-SMW User manual V1.0 Page 28...
  • Page 29 VK2-HDX23IR-SMW User manual V1.0 Page 29...
  • Page 30 – Go: When you click Go button, move the saved masking to the center of the screen. When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information you entered without saving it. VK2-HDX23IR-SMW User manual V1.0 Page 30...
  • Page 31 • Non-ROI fps: Set frame rate of the non-selected area. When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information you entered without saving it. VK2-HDX23IR-SMW User manual V1.0 Page 31...
  • Page 32 5) Camera Setup In this page, user can setup Exposure Control, Image Appearance, Exposure Control, Day & Night Control, and IR Control. VK2-HDX23IR-SMW User manual V1.0 Page 32...
  • Page 33 NOTE: When the shutter speed is manually selected, the screen may be saturated or dark. – IRIS: Determines Iris mode between automatic and fixed. – IRIS F number: Select Iris F number if Iris is in fixed mode. VK2-HDX23IR-SMW User manual V1.0 Page 33...
  • Page 34 – Enable defog: Check this box to activate the defog function. – Metering Mode: Users can change the metering mode. This is method of measuring the intensity of the light hitting and reflected by a subject in order to determine the exposure required. VK2-HDX23IR-SMW User manual V1.0 Page 34...
  • Page 35 NOTE: On level, Off level, and Delay are activated at Sensor Mode only. When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information you entered without saving it. VK2-HDX23IR-SMW User manual V1.0 Page 35...
  • Page 36 • Date & Time: User can show or hide date & time on OSD. • PTZ: User can show or hide PTZ Function/Position on OSD. NOTE: The change in this page immediately affects video stream. VK2-HDX23IR-SMW User manual V1.0 Page 36...
  • Page 37 – Mute: User can disable the output audio transmission by checking the box. When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information you entered without saving it. VK2-HDX23IR-SMW User manual V1.0 Page 37...
  • Page 38 Enter the Dwell time the event lasts from the point of detection, 1 ~ 180 seconds. When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information you entered without saving it. VK2-HDX23IR-SMW User manual V1.0 Page 38...
  • Page 39 • Dwell Time: Set the dwell time an event lasts from the point of detection of an alarm input. When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information you entered without saving it. VK2-HDX23IR-SMW User manual V1.0 Page 39...

  • Page 40: Manual Trigger

    Set the dwell time the trigger lasts. When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information you entered without saving it. VK2-HDX23IR-SMW User manual V1.0 Page 40...
  • Page 41 – ID: Order of generation, Include 1 ~ 8, Exclude 9 ~ 16. – Name: User definable zone name. – Type: Shows zone type and cannot be changed. – Threshold: Determines how large the motion in the zone can trigger event in percentage. VK2-HDX23IR-SMW User manual V1.0 Page 41...
  • Page 42 Network Loss event. Select a dwell time for how long the event will last from the point of detection. When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information you entered without saving it. VK2-HDX23IR-SMW User manual V1.0 Page 42...
  • Page 43 VK2-HDX23IR-SMW User manual V1.0 Page 43...
  • Page 44 • Enable month: Trigger event at the date of every month at specified time. When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information you entered without saving it. VK2-HDX23IR-SMW User manual V1.0 Page 44...
  • Page 45 – View Rule: The selected Events will be displayed on Video Preview, and enables you to setup VA Event. – Object: Setup the object related configurations such as Sensitivity and Size to optimize the VA detection. VK2-HDX23IR-SMW User manual V1.0 Page 45...
  • Page 46 * When there is any light or light reflection toward the camera (for example: car in the tunnel) * When there is any shadow. * When the trees or leaves are stirred by the wind. In this case please set the moving VK2-HDX23IR-SMW User manual V1.0 Page 46...
  • Page 47 2. Type the Rule Name. 3. Place the on/off toggle switch on ON, and set the preferred area to detect Intrusion event in the Video Preview window. The Intrusion area will be displayed as Yellow Cell VK2-HDX23IR-SMW User manual V1.0 Page 47...
  • Page 48 Recommended camera installation conditions . Setup height: 2.5m ~ 3.0m . Setup angle: The camera faces 30 degree down to the level. . Object: The object must be at least 3m away from the camera. VK2-HDX23IR-SMW User manual V1.0 Page 48...
  • Page 49 When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information you entered without saving it. VK2-HDX23IR-SMW User manual V1.0 Page 49...
  • Page 50 * Login method: Choose a log-in method in the drop-down list: AUTH LOGIN / AUTH PLAIN • SMTP (E-Mail) Receiver: User can assign up to 8 receivers. – Receiver #: Enter an email address. VK2-HDX23IR-SMW User manual V1.0 Page 50...
  • Page 51 If this directory does not already exist on the FTP server, there will be an error message when uploading. – User name/Password: Provide your log-in information. * Anonymous login: Check the box if you want to use anonymous login method and the VK2-HDX23IR-SMW User manual V1.0 Page 51...

  • Page 52: Alarm Out

    • Type: Select a type of NO (Normally Open) or NC (Normally Closed). When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information you entered without saving it. VK2-HDX23IR-SMW User manual V1.0 Page 52...
  • Page 53 NOTE: For a proper operation of Audio Alert, full duplex must be enabled in the Audio settings page. When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information you entered without saving it. VK2-HDX23IR-SMW User manual V1.0 Page 53...

  • Page 54: Ptz Preset

    Check the box to enable the service and return to the Home position once the event has ended. When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information you entered without saving it. VK2-HDX23IR-SMW User manual V1.0 Page 54...
  • Page 55 Select button to set a schedule for the entire week or a whole day, respectively. • Device Setting: Select the device type to be recorded in the drop-down list. The screen changes according to selection. VK2-HDX23IR-SMW User manual V1.0 Page 55...
  • Page 56 • Device Information: Show current SD card information. When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information you entered without saving it. VK2-HDX23IR-SMW User manual V1.0 Page 56...
  • Page 57 – Notification server port: The port number of the notification server. When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information you entered without saving it. VK2-HDX23IR-SMW User manual V1.0 Page 57...
  • Page 58 – Bit rate: Select a value for each condition in the drop-down list. When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information you entered without saving it. VK2-HDX23IR-SMW User manual V1.0 Page 58...
  • Page 59 Test button using the contents in “Send message” box. When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information you entered without saving it. VK2-HDX23IR-SMW User manual V1.0 Page 59...
  • Page 60 Click the Add button to make a new event map; a popup window displays as below. To change an existing event, select that event and click the Modify button; this same window will display and the information can be changed as required. Selecting an event and clicking Remove deletes the event. VK2-HDX23IR-SMW User manual V1.0 Page 60...
  • Page 61 “Return to home position after event” box. – Record: Record video stream when an event has occurred. The Record option must first be configured on the Event Out page. NOTE: This button disappears if you select AIHM as event in. VK2-HDX23IR-SMW User manual V1.0 Page 61...
  • Page 62 The destination server must first be configured on the Event In page. Enter a message you want to send. When the settings are complete, click OK button to save the settings, or click Cancel button to clear all of the information you entered without saving it. VK2-HDX23IR-SMW User manual V1.0 Page 62...
  • Page 63 4. Repeat step 2 through 3 for each additional Preset position. When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information you entered without saving it. VK2-HDX23IR-SMW User manual V1.0 Page 63...
  • Page 64 – Sequence: Select either forward or backward sequence in the Tour position list. – Delete Tour: Delete the stored Tour Position Setup list of Tour number. – Tour Position Setup: Open or close the Tour Position Setup as below. VK2-HDX23IR-SMW User manual V1.0 Page 64...
  • Page 65 Presets on drop-down list. Click a Preset. 2. Repeat step 1 for each desired position. 3. Click the Save button to save the settings, or click the Reset button to clear all of the information you entered without saving it. VK2-HDX23IR-SMW User manual V1.0 Page 65...
  • Page 66 5. You can edit title of each pattern number for easier recognition. NOTE 1: Each Pattern can store up to 500 seconds of movements. NOTE 2: The percentage total of 8 Patterns cannot exceed 100. VK2-HDX23IR-SMW User manual V1.0 Page 66...
  • Page 67 • Waiting Time: 10 ~ 600 Seconds • Function Use: Off / On When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information you entered without saving it. VK2-HDX23IR-SMW User manual V1.0 Page 67...
  • Page 68 – Max. Tilt Speed: The maximum tilt speed can be adjusted in the range 1 ~ 30. When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information you entered without saving it. VK2-HDX23IR-SMW User manual V1.0 Page 68...
  • Page 69 * Left limit: Select the left limit of pan angle range. When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information you entered without saving it. VK2-HDX23IR-SMW User manual V1.0 Page 69...
  • Page 70 • AF Module Upgrade: User can upgrade AF Module firmware remotely. When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information you entered without saving it. VK2-HDX23IR-SMW User manual V1.0 Page 70...
  • Page 71 • Location Configuration: Enter the location information. You can enter up to four locations. When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information you entered without saving it. VK2-HDX23IR-SMW User manual V1.0 Page 71...
  • Page 72 Add button. You will see the pop-up window as below. When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information you entered without saving it. VK2-HDX23IR-SMW User manual V1.0 Page 72...
  • Page 73 For more information, please see the online help. When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information you entered without saving it. VK2-HDX23IR-SMW User manual V1.0 Page 73...
  • Page 74 This is done from Setup > System > Security > Users. When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information you entered without saving it. VK2-HDX23IR-SMW User manual V1.0 Page 74...
  • Page 75 – “Use LZO compression” determines whether to use cypher compression in connection or not. – CA certificate is the certification file issued by Server for Client setup. 3. After finishing setup, click Save button and then the camera operates as an OpenVPN Server. VK2-HDX23IR-SMW User manual V1.0 Page 75...
  • Page 76 4. After finishing setup, click Save button and then the camera operates as an OpenVPN Client. When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information you entered without saving it. VK2-HDX23IR-SMW User manual V1.0 Page 76...
  • Page 77 NOTE: If using a host name for the NTP server, a DNS server must be configured under TCP/IP settings. When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information you entered without saving it. VK2-HDX23IR-SMW User manual V1.0 Page 77...
  • Page 78 DNS server. – Obtain DNS Server via DHCP: Automatically use the DNS server settings provided by the DHCP server. – Use the following DNS server address to enter the desired DNS server by specifying the VK2-HDX23IR-SMW User manual V1.0 Page 78...
  • Page 79 – Link Speed: User can select either 10Mbps or 100Mbps. When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information you entered without saving it. VK2-HDX23IR-SMW User manual V1.0 Page 79...
  • Page 80 DDNS server by checking the box and enter the Registered IP address. When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information you entered without saving it. VK2-HDX23IR-SMW User manual V1.0 Page 80...
  • Page 81 However, if a network status is poor, enter a higher value. When there are many network cameras or users, a higher value may cause a heavy load to the network. Consult with a network manager for detailed information. VK2-HDX23IR-SMW User manual V1.0 Page 81...
  • Page 82 UPnP as the service to add. When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information you entered without saving it. VK2-HDX23IR-SMW User manual V1.0 Page 82...
  • Page 83 – Priority: When the maximum bandwidth is exceeded, the data to be reduced is prioritized. When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information you entered without saving it. VK2-HDX23IR-SMW User manual V1.0 Page 83...
  • Page 84 VK2-HDX23IR-SMW User manual V1.0 Page 84...
  • Page 85 Gateway”, “Broadband sharing device” or “Home firewall”, but the essential purpose of the device is the same. When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information you entered without saving it. VK2-HDX23IR-SMW User manual V1.0 Page 85...
  • Page 86 Click the checkbox to enable Zeroconf. When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information you entered without saving it. VK2-HDX23IR-SMW User manual V1.0 Page 86...
  • Page 87 (Bonjour is a trademark of Apple Computer, Inc.) When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information you entered without saving it. VK2-HDX23IR-SMW User manual V1.0 Page 87...
  • Page 88 Select a user language. The language choices are English, Korean, French, German, Russian, Chinese, and Japanese. When the settings are complete, click Save button to save the settings, or click Reset button to clear all of the information you entered without saving it. VK2-HDX23IR-SMW User manual V1.0 Page 88...
  • Page 89 During the upload, do not turn off the power of the network camera. Wait at least two minutes and then try to access the camera again. NOTE: Backup and Restore can only be used on the same unit running the same firmware. This VK2-HDX23IR-SMW User manual V1.0 Page 89...
  • Page 90 VK2-HDX23IR-SMW User manual V1.0 Page 90...
  • Page 91 – Parameter List: Click the Parameter List button to see the unit’s parameters and their current settings. • Health Check: – System Check: Click the System Check button to get the important information about the cameras system resources. You can see the pop-up window below. VK2-HDX23IR-SMW User manual V1.0 Page 91...
  • Page 92 You can see the pop-up window below. – Network Check: Click the Network Check button to get the information about the cameras network setting and traffic. You can see the pop-up window below. VK2-HDX23IR-SMW User manual V1.0 Page 92...

  • Page 93: Help

    The Help information window will be provided as a popup window so that users can open and read it without needing to log-in. It will offer a description of the setting and Help page so that users can manipulate the network camera without a reference to the manual. VK2-HDX23IR-SMW User manual V1.0 Page 93...

  • Page 94: A Appendix

    Modify the settings for your graphics adapter. Please see the adapter’s documentation for more information. H.264 and Motion JPEG. Check that the Micro-SD card is inserted properly. Video cannot be recorded. Check that the Micro-SD card is formatted properly. VK2-HDX23IR-SMW User manual V1.0 Page 94...
  • Page 95 VK2-HDX23IR-SMW User manual V1.0 Page 95...

  • Page 96: Alarm Connection

    Every three-month, perform the following maintenance. 1. Inspect all connection cables for deterioration or other damage. 2. Clean components with a clean damp cloth. 3. Verify that all the mounting hardware is secure. VK2-HDX23IR-SMW User manual V1.0 Page 96...

  • Page 97: System Requirement For Web Browser

    • Heavy network utilization due to poor infrastructure. Frame rate and Bandwidth affected. • Heavy network utilization via wireless router due to poor infrastructure. Frame rate and bandwidth affected. • Viewing on poorly performing client PCs lowers perceived performance. Frame rate affected. VK2-HDX23IR-SMW User manual V1.0 Page 97...

  • Page 98: Product Specification

    Network Time Sync NTP Server, Synchronize Computer, Manual Software Reset Restart, Reset, Factory Default Hardware Factory Reset Auto Recovery Backup, Restore Remote Upgrade Web Browsing (IE, Chrome, Safari, Firefox), SmartManager SD Recording Mode Event / Continuous VK2-HDX23IR-SMW User manual V1.0 Page 98...
  • Page 99 PoE (IEEE 802.3af compliance, Class4), 12VDC 380mA (20W) @ PoE, Power Consumption 1.5A (18W) @ 12VDC Dimensions See dimension drawing Net Weight Approx. 2.8kg Ingress Protection IP66 * Specifications are subject to change without notice. Figure – Dimension VK2-HDX23IR-SMW User manual V1.0 Page 99...
  • Page 100 23X 2M NETWORK SPEED DOME CAMERA Rev.A...

Table of Contents