Renkforce CD-3308 Instruction Manual page 63

ENGLISH 63
Version 11/06
Operation
refer to page 40
• UP/DOWN buttons (11)
With these buttons the receiving frequency can be changed to adjust stations in radio
operation.
By shortly pressing a button, the frequency is changed manually step by step.
By pressing a button longer, you activate the auto-scan. The auto-scan only stops at the
next station that can be received well.
• A/PS button (12)
If you press this button shortly, the stations stored on the station buttons 1-6 (4) are
played for 5 seconds each. To stop the auto-scan, press the button again.
When you keep the button pressed, all the stations that can be received well are stored
on the station buttons 1-6 (4).
After this procedure, the stored stations are played for 5 seconds each, as described
above.
• SCN button (13)
This button starts the auto-scan.
When a station has been found, it is played for 5 seconds and then the auto-scan is
continued.
Press the button again to stop the auto-scan to listen to the currently played station.