Renkforce CD-3308 Instruction Manual page 60

60 ENGLISH
Operation
• Station buttons 1-6 (4)
If you shortly press these buttons, you can select a station you have pre-set.
If you want to store a station you are listening to, simply press the desired button for
more than 1 second.
Every one of the three FM ranges (FM1-3) has six station buttons. Therefore
you can assign 18 station buttons.
• AF button (5)
The AF button (5) activates the automatic transmitter station tracking.
"AF" will be displayed. If the reception of an RDS transmitter station gets weaker or the
radio does not receive and RDS station at all, the display flashes. When a station can be
received well, the symbol is displayed continuously.
When an RDS station is being received, the name of the station is displayed.
When you leave a transmission area, the radio can only switch to a better sender when
the AF function is activated.
Regional identification
Press the AF button (5) for about 2 seconds until the display shows REG ON or REG OFF.
When you press the AF button once more, you switch between these two modes. The
normal display reappears automatically after a few seconds.
If REG ON is on and the reception gets weaker, the radio only switches to a different
frequency with exactly the same progamme.
When the regional identification is off (REG OFF), and the reception gets weaker, the
radio switches to a different transmitter station with the same regional identification.
Version 11/06
refer to page 40