Honeywell Searchline Excel Technical Handbook page 93

MAN0530 Issue 10 - 11/09
2104M0506
APPENDIX A - HANDHELD INTERROGATOR
show status
This menu option displays the calibration and configuration status of the system. The status
information is displayed in the following format:
where:
cccccccc...
sssssssss
The different settings from the list are selected using the
The calibration status fields and values are given below:
Calibration Status Fields
Temperature Cal.
Zero Calibration
Span Calibration
4-20mA Calibration
Det. Temp. Comp.
Det. Sens. Comp.
Installation
Valid Date Time
Loop Test
A.5.4 Diagnose Menu
This sub menu has the following options:
Active Faults
Active Warns
Self Test
Soft Reset
active faults
This menu option displays operational faults when the system is in service.
If there are one or more faults present, then the faults are displayed one at a time.
Use the and keys to navigate the list.
If no active faults are present the display shows the following for three seconds:
The Diagnose sub menu is then displayed.
cccccccccccccccc
ssssssss
Title of the calibration status field.
Current state of calibration.
Display Text
Temp Sensor
Zero Ratio
Span Sensitivity
Analogue Output
T Compensation
Det Sensitivity
Installation
Date and Time
Analogue Check
Display the active faults in the system.
Display the active warnings in the system.
Perform a diagnostic system self test.
Reset the system.
None Present
93
and keys on the keypad.
False State
Uncalibrated
Uncalibrated
Uncalibrated
Uncalibrated
Uncalibrated
Uncalibrated
Required
Estimated
Failed
Searchline Excel
True State
Calibrated
Calibrated
Calibrated
Calibrated
Calibrated
Calibrated
Complete
Set
Passed