Honeywell Searchline Excel Technical Handbook page 86

MAN0530 Issue 10 - 11/09
2104M0506
APPENDIX A - HANDHELD INTERROGATOR
rrrrrr
uuuu
/
normally
signal magnitude
Show the level of the sample and reference signals.The display is in the following format:
where: aaaaaaa
bbbbbbb
dynamic reserve
Shows the acceptable drop in signal level before beam block occurs as a percentage of the
current signal level.The display is in the following format:
where: xxx.xx
s/W version
Displays the system software version and the current time and date. The display is in the
following format:
where: vvVvv
hh.mm
dd/mm/yy
Note: The year 2000 is displayed as 00.
Gas reading.
Measurement units.
This is a status character which indicates one of the following:
/ -
-
|
-
W
-
F
-
B
-
A
Sample: aaaaaaa
Ref:
Signal magnitude for the sample channel.
Signal magnitude for the reference channel.
Dynamic Reserve:
The acceptable drop in signal level before beam block measured as a
percentage of the current signal level.
Excel S/W vvVvv
hh:mm dd/mm/yy
Version number of the Excel system software.
System time as hours and minutes.
System date as day of the month, month number and the last two
digits of the year.
A spinning line shows the system is operating
i.e. in a fully active state.
A stationery line shows the system is in an inactive
state.
Active Warning.
Active Fault.
Beam Block.
Alarm
bbbbbbb
xxx.xx %
86
Searchline Excel