Honeywell Searchline Excel Technical Handbook page 91

MAN0530 Issue 10 - 11/09
2104M0506
APPENDIX A - HANDHELD INTERROGATOR
initialisation
This starts the initialisation process. The following message is displayed:
This message is displayed during the initialisation process after pressing Enter.
This message is displayed for three seconds at the end of a successful initialisation process.
Note: The Searchline Excel system is live after a successful initialisation.
set time
This option lets you set the system's time and date.
The initial display after SET Time is chosen is in the following format:
where:
hh
mm
When first displayed only the current hour is shown.
All settings are adjusted by means of the
After setting the hour the minutes are displayed.
After the time has been entered then the same process is used to set the date which is displayed
in the following format:
where:
dd
mm
yy
Notes:
1. The time and date will not be updated unless both are entered and accepted without
error.
2. The year 2000 is displayed as 00.
Press Enter to
Initialise Unit
Processing Data
Please Wait
Unit Initialised
Hours.
Minutes.
Date DD/MM/YY
Day.
Month.
Last two digits of the year.
Time HH:MM
hh:mm
and keys on the keypad.
dd/mm/yy
91
Searchline Excel