Table of Contents
Advertisement
MAN0530 Issue 10 - 11/09
2104M0506
3. INSTALLATION AND OPERATION
This section is only relevant to handheld software versions 4VO and greater.
Calibrator
Type SHC1
This switches on the unit.
Z - SHC1 EXCEL
Note:
Interrogator 4V0
ESC
The Interrogator displays the following start-up message for approximately three seconds:
(3)
Quickly check the type of connected detector shown on the top line of the message.
The display shows excel or optima+ or optima.
(4)
If the unit displays Optima+ or Optima immediately press the ESC key on the
keypad.
The esC key must be pressed within 3 seconds to have any effect. Also see Appendix A,
section 5.6.
This toggles the Interrogator mode between excel, optima Plus and optima.
The start-up message is updated and displayed again for 3 seconds then the unit
displays the Main menu, which is the top level of its Interrogator's menu style interface,
as follows:
The first line of the display shows the current level in the menu tree and the second line
displays a sub-menu title, action or data.
setting the real-time Clock
The gas detector clock needs to be initially set so that faults, events, etc., can be accurately
recorded and tracked for diagnostic purposes.
(1)
Select Calibrate from the Main menu by pressing the
keypad to navigate through the menu options.
(2)
Press
(Enter) on the Interrogator keypad to display the Calibrate menu.
(3)
Select Set Time/Date from the Calibrate menu.
Full details of the SHC1 Handheld Interrogator can be
found in Appendix A.
Z - SHC1 EXCEL
Interrogator
Main
Display
43
(up) and
(down) keys on the
Searchline Excel
Hide quick links:
Advertisement
Table of Contents
