Status Leds; Table 1-1. Port Link And Activity Leds; Figure 1-2. Hirschmann Gigalion-24Tp Port Leds - Hirschmann GigaLION-24TP User Manual

Status LEDs

The LEDs, which are located on the front panel for easy viewing, are shown below
and described in the following table.
24
SFP Port Enabled

Figure 1-2. Hirschmann GigaLION-24TP Port LEDs

LED Condition
RJ-45 Ports
Link/Act On/Flashing Yellow The port has a valid 10 or 100 Mbps link. Flashing indicates
On/Flashing Green The port has a valid 1000 Mbps link. Flashing indicates activity.
FDX On Green
Off
SFP Transceiver Slots
Ports 21-24 On Green
Off
1000=Green 10/100=Yellow
5
1 3 7 9 11 13 15 17
2 4 6 8 10 12 14 16 18
1000=Green 10/100=Yellow

Table 1-1. Port Link and Activity LEDs

Status
activity.
The port is operating in full-duplex mode.
The port is operating in half-duplex mode.
An SFP transceiver port has established a valid 1000 Mbps
network connection. The associated RJ-45 port is disabled.
An SFP transceiver port has no valid link, or the link has failed.
The associated RJ-45 port is enabled.
Description of Hardware
Port Link and Activity
Link
Power
/Act
Console
19 21 23
FDX Diag
Link
RPU
/Act
20 22 24
FDX
Full Duplex Operation
1
ES4524C
1-3