SAGEMCOM RCI88-320 User Manual page 176

HDMI OUTPUT
HDMI version 1.3
HDCP version 1.1
Rely on the (E)EDID HDMI information
returned by the display device
AUDIO
- 2 channels PCM in case of MPEG1-
layer II and Dolby Pulse/HE-AAC
stereo
- AC3 or PCM in case of AC3 bitstream
- E-AC3, AC3 or PCM in case of E-AC3
bitstream
- AC-3 or PCM in case of Dolby
Pulse/HE-AAC MC (*)
(*) according to (E)EDID HDMI
information
AUDIO OUTPUT
Optical S/PDIF
- 2 channels PCM in case of MPEG1-
layer II and Dolby Pulse/HE-AAC
stereo
- AC3 in case of AC3 bitstream
- E-AC3 in case of E-AC3 bitstream
- AC-3 in case of Dolby Pulse/HE-AAC
MC
HiFi and SCART
- Mono stereo in case of MPEG1 layer II
- 2 channels downmix in case of AC3,
E-AC3, Dolby Pulse/HE-AAC
ETHERNET 10/100BT
Fully integrated IEEE 802.3/802.3u
10/100 base T-Physical layer
Auto-negotiation 10/100
Full/Half Duplex
Adaptive equaliser
Baseline wander correction
* Optional
CONDITIONAL ACCESS
1 x Smart card reader, ISO/IEC 7816
DATA PORT
1 x RS232 through AUX Scart
1 x USB 2.0 Host (High Speed)
1 x RJ45 (Ethernet 10/100 base T)
FRONT PANEL
1 x Smart Card reader
1 x IR sensor: 38 kHz
14 x Buttons (partly backlit)
REAR PANEL
1 x IEC169-2 (female: RF In)
1 x IEC169-2 (male: RF Out)
2 x SCART (TV, AUX)
1 x HDMI
2 x RCA Stereo L/R
1 x RCA CVBS
1 x Optical S/PDIF
1 x RJ45 (Ethernet 10/100 base T)
2 x USB 2.0 Host (High Speed)
1 x Power On/Off switch
84
POWER SUPPLY
Mains supply voltage: 220-240 V
~50 Hz
Max. Power consumption: < 23 W
Standby mode: < 2 W in passive mode
PHYSICAL SPECIFICATIONS
Receiver:
- Size (wxdxh): 363x225x50 mm
- Weight: ~1.7 Kg
- Operating temperature: 0°C to +40°C
- Storage temperature: -25°C to +65°C
ACCESSORIES
1 x Power cord for internal AC/DC
(1.5 m)
1 x Remote control
2 x Saline 1.5 V batteries (AAA type)
1 x HDMI cable (2 m)
1 x RF cable (2 m)
1 x Scart cable (1.5 m)
1 x Quick Installation guide
1 x User manual