Search For New Software; Network Scan Mode - SAGEMCOM RCI88-320 User Manual

7.1.2 Search for new Software

You can manually start a new software update detection if needed. This feature will be particularly helpful
if you refused a download that you eventually want to perform.
To start a manual search of new software:
1. Press the MENÜ
2. Select SETTINGS with
3. Select SYSTEM UPDATE with
or the right
4. Select SEARCH FOR NEW SOFTWARE with
press OK .
5. The receiver searches for new software.
6. If new software is available, select the required action
(download it now, in standby or do not download) and press OK
For more details on the Software update process, refer to Software Update, page 68.

7.1.3 Network Scan Mode

By default, your receiver automatically checks if new channels are available and installs them when in
standby mode.
You can modify the network scan mode to be:
• Automatic: The receiver automatically scans the network for new channels and installs them when it
is in standby mode.
• Manual: Whenever new channels are available, the receiver asks you if you want to install them.
To modify this setting:
1. Press the MENÜ
2. Select SETTINGS with
3. Select SYSTEM UPDATE with
or the right
4. Select NETWORK SCAN MODE with
OK or the right
5. Select the desired mode, AUTOMATIC or MANUAL with
or .
6. Press OK
key.
or , and press OK
or
key.
key.
or , and press OK
or
key.
key.
to confirm the new setting.
.
, and press OK
or , and
.
, and press OK
or , and press
38
.