Setting Up A Wired Connection (Lan); View Internet Settings - SAGEMCOM RCI88-320 User Manual

7.3.2 Setting up a wired connection (LAN)

To connect the receiver to the Internet via Ethernet:
1. Connect one end of a RJ45 Ethernet cable (cable not provided) to the NETZWERK port of the receiver.
2. Connect the other end of the Ethernet cable to a free Ethernet port on your router.
3. Press the MENÜ
INTERNET SETUP > WIRED.
4. Thereafter, you will get an assistant helping you to set up the wired Internet connection step by step.

7.3.3 View Internet Settings

Use this menu to view the Internet settings configured on the receiver.
1. Press the MENÜ
2. Select SETTINGS with
3. Select SYSTEM SETUP with
4. Select INTERNET with
5. Select VIEW SETTINGS with
6. The network information appears onscreen depending on the type of connection.
key, and select SETTINGS > SYSTEM SETUP > INTERNET >
key.
or , and press OK
or , and press OK
or , and press OK
or .
47
.
.
or the right key.