Changing Wireless Settings (Wlan) - SAGEMCOM RCI88-320 User Manual

7.3.4 Changing wireless settings (WLAN)

1. Press the MENÜ
2. Select SETTINGS with
3. Select SYSTEM SETUP with
4. Select INTERNET with
5. Select CHANGE SETTINGS with
Activating/Deactivating WLAN
Use this menu to activate/deactivate the wireless connection.
In CHANGE SETTINGS, select the relevant action, ACTIVATE WLAN or DEACTIVATE WLAN.
Changing Wireless Settings
In CHANGE SETTINGS, select WIRELESS SETTINGS and press OK
Use the automatic configuration if your wireless network is visible and authorizes devices to detect it
and register.
1. .Select AUTOMATIC with
2. The receiver searches for available wireless networks.
3. The wireless network screen appears, displaying the following information:
• name of the network found (SSID)
• security set on the network - none (unsecured), WEP, WPA-PSK or WPA2-PSK
4. To modify the value of a setting, select it and press OK
5. Confirm your modifications by selecting SAVE and pressing OK
Use the manual configuration if your wireless network is not visible but authorizes devices to detect it
and register. To do so, have the following network information ready: SSID network name, Security type
and key.
1. Select MANUAL with
2. Select the SSID field and press OK
3. Enter the name of the wireless network using the virtual keyboard. Confirm your entry by selecting SAVE
and pressing OK
4. Select the SECURITY TYPE field and press OK
5. Select the type of security used on the network (unsecured, WEP, WPA-PSK or WPA2-PSK) with
and , and press OK
6. Select the SECURITY KEY field and press OK
7. Enter the security key using the virtual keyboard. Confirm your entry by selecting SAVE and
pressing OK
8. Confirm your modifications by selecting SAVE and pressing OK
key.
or , and press OK
or , and press OK
or , and press OK
or
or , and press OK
or , and press OK
.
.
.
.
.
.
or the right
, and press OK or the right
.
.
.
.
.
48
key.
key.
.
.