Energy Saving Mode - SAGEMCOM RCI88-320 User Manual

OSD Transparency
This menu lets you select how transparent you want On-
Screen Display (on screen menus and pop-up messages) to
be displayed.
1. Select OSD TRANSPARENCY with
OK or the right
2. Select the
transparency) or the desired percentage, with
Press OK
3.
Start Channel
Select 'On' if you want the receiver to always switch on a
specific channel. Select 'Off' if you want the receiver to power
on the last channel watched.
1. Select START CHANNEL with
or the right
2. Select the desired state, OFF (display the last channel
watched) or ON (display the start channel), with
3. Press OK

7.2.4 Energy saving mode

Activate the energy saving feature if you want the receiver to use less power when in standby mode.
Note
If Energy Saving Mode is set the receiver needs longer when being started from
standby mode.
To modify this setting:
1. Press the MENÜ
2. Select SETTINGS with
3. Select SYSTEM SETUP with
the right key.
4. Select ENERGY SAVING MODE with
OK or the right
5. Select the desired state, OFF (disable) or ON (enable),
with or .
6. Press OK
key.
desired transparency,
to confirm the new setting.
or
key.
to confirm the new setting.
key.
or , and press OK
or , and press OK
key.
to confirm the new setting.
or , and press
NONE (disable
or .
, and press OK
or .
.
or
or , and press
45