Test Connection - SAGEMCOM RCI88-320 User Manual

Configuring IP Settings
In CHANGE SETTINGS, select CONFIGURE IP SETTINGS and press OK
Use the automatic configuration if the receiver can automatically retrieve its network settings from the
local network (DHCP or BOOTP server enabled).
1. Select AUTOMATIC with
2. The receiver retrieves its network settings dynamically.
3. A message informs you when the receiver has successfully retrieved its network settings.
Use the manual configuration if the local network does not automatically assign network settings to the
receiver (DHCP or BOOTP server disabled). To do so, you need to know the network information to
assign to the router: IP, subnet mask, gateway and DNS server addresses.
1. Select MANUAL with
2. Select the IP ADDRESS field and press OK
3. Enter the IP address of the receiver and press OK
4. Repeat the operation to fill in the subnet mask, gateway and DNS server addresses.
5. Confirm your modifications by selecting SAVE and pressing OK
Configuring Host Settings
In CHANGE SETTINGS, select CONFIGURE HOST SETTINGS and press OK
Use this menu to change the name by which you want to identify the receiver on the local network.
1. Select the HOST NAME field and press OK
2. Enter the name by which you want to identify the receiver on the local network.
3. Select SAVE and press OK

7.3.5 Test connection

Use this menu to test the Internet connection of your receiver.
1. Press the MENÜ
2. Select SETTINGS with
3. Select SYSTEM SETUP with
4. Select INTERNET with
5. Select TEST CONNECTION with
6. The receiver tests the connection and displays a result screen.
or , and press OK
or , and press OK
to confirm the new settings.
key.
or , and press OK
or , and press OK
or , and press OK
or , and press OK
49
.
.
.
.
.
.
.
or the right
or the right key.
.
.
.
key.