Settings Menus; System Update; Software Update Mode - SAGEMCOM RCI88-320 User Manual

7. Settings menus

To access and move around the menus and change various settings, just use the left, right, up and
down keys to highlight your selections, use OK
screen.
These keys are available both on the remote control and on the front panel of the receiver.
You can also enter the number assigned to a menu to directly select it.
For an overview of the Settings tree and the default values, refer to Overview of the Settings menu,
page 63.

7.1 System Update

The SYSTEM UPDATE menu lets you configure the software update feature, search for channels,
monitor the system and reset the receiver to its default factory settings.
To return to the previous screen and save your changes, use the ZURÜCK
To exit the menu screen, press the MENÜ

7.1.1 Software Update Mode

By default, your receiver automatically checks if new software is available and asks you if you want to
perform the download.
You can modify the software update mode to be:
• Automatic: The receiver automatically downloads new software when the receiver is in standby
mode.
• Manual: Whenever new software is available, the receiver asks you if you want to perform the
download now, postpone it until you put the receiver in standby mode or refuse the download.
To modify this setting:
1. Press the MENÜ
2. Select SETTINGS with
3. Select SYSTEM UPDATE with
or the right
4. Select SOFTWARE UPDATE MODE with
press OK
5. Select the desired mode, AUTOMATIC or MANUAL with
or .
6. Press OK
For more details on the Software update process, refer to Software Update, page 68.
key.
or , and press OK
or
key.
or the right key.
to confirm the new setting.
to confirm, and ZURÜCK
or EXIT
.
, and press OK
or , and
37
to leave a
or the left
key.
key.