Download Print this page

Jenn-Air SEG196 Use And Care Manual page 46

Gas-electric grill-range
Hide thumbs Also See for SEG196:

Advertisement

To remove,pull forwardto the "stop"position;lift
I__\
_f.
up on the front of the rack and pull out.
The oven TEMPERATURE knob can be adjusted if the oven temperature is too low or
too high and the length of time to cook ALL foods is too long or too short. Do NOT adjust
the TEMPERATURE knob if only one or two items are not baking properly.
To adjust the TEMPERATURE knob:
Turnthe oven TEMPERATURE knobto OFF.
Removethe knoband turn it to the underneath
_Tdangle
side. Hold it so that the triangle is at the top.
f_.-------..z_=_
_.=/_'_ _...--Top Screw
(See F,g. 1)Loosen the two screws s,,ght,y.
///
.o-_'_ _'_"°_'_'f_ _/i
_ (_oo_
,
_`.,
Holdingthe skirtin place, move the top screw
go. _
_
\
by rotating the knob one notch, as noted by
one click, in direction necessary. If notch
i
indentation is not apparent, tighten screws
_._._j_
_
JJ_'_Sklrt
untilclickingis heard. There are five notches
_c_ _,_
/_
in each direction. One notch equals approxi-
_
FIG.1
mate/y IO'F.
Example: If the °ven temperature is t°° c°°l
_
/
and ALL foods are requiring a longer time
_._._ _,o_%
period to cook, the knob should be rotated to
_
.
move the top screw toward the word "HOT-
TEl:l". (See Fig. 2)
Tighten the screws while tightly holding knob
\\
,_Otc. _ov¢ -_
to skirt. To replace knob, match flat part of
knobopeningwith spring on the shaft, return-
FIG.2
ing to OFF position.
Important: The ovenTEMPERATURE knob shouldbe adjustedone notchandthen the
oven should be tested. (We recommend baking 2-9" yellow layer cakes using a
purchasedbox mix.) If the oven temperatureis still too low or too high, repeat the
proceduredescribedabove.
If the knob is rotated too far or in the wrong direction, rotate the knob in the opposite
direction until the center of the screw is directly under the triangle, which is the starting
point. Initiate the procedure again until the desired temperature is reached.
46

Advertisement

loading