Jenn-Air SEG196 Use And Care Manual page 29

Gas-electric grill-range

Hide thumbs Also See for SEG196:

7. Push ENTER buttonto enter stop time.

The indicator word AUTO will blink in the Display Window. When start time is

reached, the indicatorword AUTO will remain in Display Window. The OVEN

indicator light wil_glow unti_the desired temperature is reached. When stop time

is reached,the oven shuts offand the indicator word AUTO willbeginto blinkand

timerwill beep. Beeping will continueevery 10 secondsfor t 5 minutesunlessthe

CANCEL buttonis pushedtwice.

To check START TIME before cooking begins: Hold in START TIME buttonuntilthe

words START TIME appear in the DisplayWindow. The start time will be displayed

briefly,then Displaywill returnto time of day.

To change START TIME before cooking beglne:

1. Hold in START TIME buttonuntilthe wordsSTART TIME appear in the Display

Window.

2. Turn SET dial to desiredtime.

3. Push ENTER button twice to enter new start time and stop time previously

programmed.

To eheek STOP TIME: Hold in STOP TIME button untilthe wordsSTOP TIME

appear in the Display Window. The stop time will be displayed briefly, then Display

will returnto on-goingprogram.

To change STOP TIME:

1. Hold in STOP TIME button until the words STOP TIME appear in the Display

Window.

2. Turn SET dial to desired time.

3. Push ENTER buttonto enter stop time.

To Cancel function programmed: Push CANCEL button twice to cancel function,

duringprogrammedtime or after time has expired.

Note;

After clock-controlledbaking,turn SELECTOR and TEMPERATURE knobsto

OFF position.

Note:

Since food continuesto cook if leftin the oven, it is suggestedthat the clock

controls be used primarilyto start the oven when no one is in the kitchen.

Provisions shouldbe made to havethe foodremovedas soon as the signalhas

sounded.

NOTE: if morethan 7 secondselapses between holdingin START TIME button

or STOP TIME button and turning the SET dial the display window will

automaticallyreturnto on-goingprogram.

NOTE: Ifmorethanl minuteelapsesbetweenturningSETdialtoanewtimeand

enteringnew START TIME and STOP TIME, the entire programwill be

cancelledand displaywill returnto time of day clock.