Jenn-Air SEG196 Use And Care Manual page 11

To adjust the Lo setting:
1. Light burner and set controlknob for low flame.
2. Remove control knob from valve stem.
CAUTION: Never use a metal blade to
pry knob off. If knob cannot be easily
removed, tuck the folds of a cloth --'---------.__
dishtowel under the knobskirt and pull _OCKW_SE
TO REDUCE
the towel upward with steady,
even _ FIJ_MESlZE
pressure.
3. Inserta slender,thin-b_ade screwdriver
intothe recessat center of valve stern
and engagebladewith slot in adjusting COU_rn:RCLOC_,SE
screw, TO INCREASE FI.._ME
SIZE
4. Tumcenterstemadjustingscrewsfightly
toset flame size. Note: Turn clockwise
to reduce or counterclockwise to in-
creaseflame size.
5. Replacecontrolknobwhenadjustment
is completed.
Properadjustmentwill producea stable, steady blueflame of minimumsize. The final
adjustmentshould be checked by turning knob from Hi to Lo several times without
extinguishing the flame.
This adjustment,at the Lo setting,will automaticallyprovidethe properflame size at
Med setting.
11