Jenn-Air SEG196 Use And Care Manual page 17

Gas-electric grill-range

Hide thumbs Also See for SEG196:

Enlarged version

The grill accessory consistsof two black grill grates, and a grill burner.

Note: Only install the grill on the left side of your range.

1. Beforeinstallinggdll components,be certaincontrolknobs are inthe OFF position.

2. Positionthe grill burner with mixer tube openingstowardsthe orifices. Slide the

burnertowardsthe orificesuntilthe ignitor is in betweenfront andrear grillsections.

Lowerinto plaae untilside openingsare restingon the burner support pins.

3, Place the grill grates on the top of the rangetop.

NOTE= Before usingthe grillfor the first time, heat the E-yen Heat_ grill burnerto

removethe protectiveshippingcoating. Heat thegrill on Hi for 10 minutes

and usethe vent system to remove any additionalsmokeduringcooling.

1. Removegrillcomponentsoncethey are cool. Be surecontrolknobsare in theOFF

position.

2. Remove grfll grates,

3. Remove grill burner,