Technical Product Information; Ce Declaration And Standards; Technical Information - Quickie Puma 20 Technical Manual

192 | Technical product information

7 Technical product information

7.1 CE Declaration and standards

This product complies with the COUNCIL DIRECTIVE 93/42/EEC of 14 June 1993
concerning medical devices. The product also meets the following requirements and standards. This
has been verified by independent test organizations.
Standard
EU guideline
93/42 EEC
NEN-EN 12182
NEN-EN 12184
(2009)
Class B
ISO 7176-8
ISO 7176-9
ISO 7176-14
ISO 7176-16
ISO 7176-19
(2008)

7.2 Technical information

Batteries
Maximum battery dimensions
Maximum battery dimensions with Dahl system
Battery capacity
Battery capacity with Dahl system
Maximum permissible charging voltage
Maximum charging current
Connector type
Insulation Class 2 double insulated
Model: PUMA 40 Sedeo Pro+
Description
Maximum user weight
Maximum user weight with car docking
Total length including legrests
Total width 13" drive wheels
Total width 14" drive wheels
Total weight without batteries:
Batteries 40 Ah (C20) (set of two)
Batteries 60 Ah (C20) (set of two)
Batteries 74 Ah (C20) (set of two)
Electrical high/low adjustment
Electrical tilt adjustment
Electrically elevating central legrest
Electrically elevating legrests
Car docking
Puncture-proof drive wheels (set of two)
Transport weight of the heaviest part
All mesurements of dimensions etc. should be considered as value with a average tolerance of 1%
* The following aspects have a negative effect on the distance range: obstacles, rugged terrain, driving on slopes, exposure to temperatures
below freezing point and frequent use of electronic adjustment options.
** Seat height incl. load, 0° set angle and 13" drive wheels
Definition/description
93/42 EEC Requirements as stated in Appendix 1 apply n/a
The EN 12182 requirements as stated in NEN-EN 12184 (2009):
Technical aids for disabled persons - General requirements and
test methods October 1999
Electrically powered wheelchairs, scooters and their chargers -
Requirements and test methods October 2009
Requirements and test methods for impact, static and fatigue
strengths July 1998
Climatic tests for electric wheelchairs IPX4
Requirements and test methods for power and control systems
for electrically powered wheelchairs 1997
Requirements for resistance to ignition of upholstered parts May 1997
The Puma 20/40 meets the crash test requirements as described in
ISO 7176-19 (2008)
Max.
260 x 172 x 210 (10.2 x 6.8 x 8.3)
260 x 172 x 190 (10.2 x 6.8 x 7.5)
40 / 60 / 74 GEL; 50 AGM (Puma 20 only)
40 / 60
24
12
Controller
Class 2 double insulated
Unit
kg (st.) 160 (25.2)
kg (st.) 136 (21.4)
mm (inch) 1160 (45.7)
mm (inch)
mm (inch)
kg (st.)
kg (st.)
kg (st.)
kg (st.)
kg (st.)
kg (st.)
kg (st.)
kg (st.)
kg (st.)
kg (st.)
kg (st.)
Test dummy weight
n/a
Puma 20: 136 kg
Puma 40: 160 kg
Puma 20: 136 kg
Puma 40: 160 kg
n/a
n/a
n/a
n/a
77 kg
Unit
mm (inch)
mm (inch)
Ah
Ah
V
A (rms)
Class B
FWD
610 (24)
655 (25.8)
87,3 (13.7)
+ 28,4 (4.5)
+ 34,6 (5.5)
+ 45,8 (7.2)
+ 18,8 (3)
+ 9,8 (1.5)
+ 9,5 (1.5)
+ 4 (8.8)
+ 4,5 (0.7)
+ 8,4 (1.3)
83,9 (13.2)
Puma 20/40
RWD
160 (25.2)
136 (21.4)
1115 (43.9)