Replacing The Castor Fork, All Puma-Versions - Quickie Puma 20 Technical Manual

136 | 136 |
5.3.18

Replacing the castor fork, all Puma-versions

Preparation
• Switch off the wheelchair via the remote control.
• Use a lifting device to raise the drive and castor wheels
clear of the ground.
Instructions
• Remove the castor wheel. (See instruction: Replacing
the castor wheel)
• Remove the ball head cover and loosen the bolt,
washers and shaft that hold the castor fork in the castor
arm.
• Take the castor fork out of the castor arm.
• Remove the fender from the castor fork (not valid for
Puma 20).
• Replace the fender on the new castor fork.
• Mount the castor fork and wheel in the reverse order.
1
Note! Suitable work area required!
3
2
1
3
110648-03-035_5spaak_2016
Relevant article numbers
9005932 Castor fork (9" and 10")
9007752 Castor fork 60 mm (8") (only for Puma 20)
Tools used
• Lifting device
• Torque wrench, socket, 13 mm
• Torque wrench, Torx key T30
• Circlip pliers
• Loctite 243
Icons
Note! Be aware of the issue!
2
110648-03-001
4
Puma 20/40