Replacing The Drive Wheel, Indoor/Outdoor, Puma 20 (All Versions) - Quickie Puma 20 Technical Manual

Puma 20/40
5.3.12

Replacing the drive wheel, indoor/outdoor, Puma 20 (all versions)

Preparation
• Switch off the wheelchair via the remote control.
• Be sure that the freewheel switch is in 'drive' mode. If
the freewheel switch is in 'push' mode this will make
loosening the bolts impossible.
• Use a lifting device to raise the drive wheels clear of the
ground.
Instructions
• Remove the cap and remove the bolt and the locking
washer.
• Replace the new drive wheel.
• Screw the bolt with ring into the shaft, lock the locking
plate and put the cap back again.
• Check the tyre pressures.
Notice
Inflate the tube to the correct pressure! (See 'Technical
specifications')
Relevant article numbers
9006792 Drive Wheel mounting set, Puma 20
9011634 Drive wheel indoor 12 1/2 x 2 1/4 (13"), air, excl hub
9011635 Drive wheel indoor 12 1/2 x 2 1/4 (13"),
punctureproof, excl hub
9011636 Drive wheel outdoor 3.00-8, grey air (14"), excl hub
9011637 Drive wheel outdoor 3.00-8, grey punctureproof
(14"), excl hub
9011638 Drive wheel outdoor 3.00-8, grey air (14"), All
Weather, excl hub
9011639 Drive wheel outdoor 3.00-8 , black air (14"), excl
hub
9011640 Drive wheel outdoor 3.00-8 , black punctureproof
(14"), excl hub
1017314 Drive wheel indoor 12 1/2 x 2 1/4, grey air (13"),
Puma 20
1017958 Drive wheel indoor 12 1/2 x 2 1/4, grey air (13"),
Puma 20, set
1017315 Drive wheel indoor 12 1/2 x 2 1/4, grey
1
Note! Suitable work area required!
punctureproof (13"), Puma 20
1017959 Drive wheel indoor 12 1/2 x 2 1/4, grey
punctureproof (13"), Puma 20, set
1017312 Drive wheel outdoor 3.00-8, grey air (14"), Puma 20
1017956 Drive wheel outdoor 3.00-8, grey air (14"), Puma
20, set
1017313 Drive wheel outdoor 3.00-8, grey punctureproof
(14"), Puma 20
1017957 Drive wheel outdoor 3.00-8, grey punctureproof
(14"), Puma 20, set
Tools used
• Lifting device
• Screwdriver
• Hammer (plastic)
• Torque wrench, socket, 13 mm
• Water pump pliers
Icons
Parts need to be replaced. Dispose of waste parts in
accordance with local regulations
Bolts are provided with Loctite thread locker!
Note! Be aware of the issue!
2
110648-03-001
| 119 | 119