Replacing The Coloured Covers (All Puma 40-Versions, Not Valid For Puma 20) - Quickie Puma 20 Technical Manual

Puma 20/40
5.3.27

Replacing the coloured covers (all Puma 40-versions, not valid for Puma 20)

Ball head cover / Deco ring motor arm / Deco strip suspension bridge cover
Preparation
Switch off the wheelchair via the remote control.
Instructions
Ball head cover set:
• Take away the old cover and click back the new cover.
Deco ring motor arm set:
• Take away the old cover and click back the new cover.
Deco strip under the suspension bridge cover:
• Take away the old cover
• Click the new cover with turning movement back under
the suspension bridge cover.
Notice
Use a screwdriver in case you can't get off the covers by
hand.
1
Note! Suitable work area required!
3
Relevant article numbers
9009748 Deco covers green
9009749 Deco covers blue
9009750 Deco covers orange
9009751 Deco covers silver
Tools used
Screwdriver
Icons
N.a.
2
110648-03-001
4
110648-03-073_3_5spaak_2016
| 153 | 153
110648-03-072_3_5spaak_2016
110648-03-074_3_5spaak_2016