Adjusting The Centre Point Of Gravity, All Puma-Versions - Quickie Puma 20 Technical Manual

Powered wheelchair
Hide thumbs Also See for Puma 20:
Table of Contents

Advertisement

Puma 20/40
5.3.30

Adjusting the centre point of gravity, all Puma-versions

Preparation
Switch off the wheelchair via the remote control.
Instructions
• Remove the leg rests.
• Loosen the 4 bolts.
• Move the whole chair unit to the correct position.
• Remount the 4 bolts.
• Replace the leg rests.
Notice
Changing the wheelchair's centre of gravity may negatively
influence the wheelchair's driving characteristics and/or its
dynamic stability! Therefore it might be sensible to use the
RWD hole for a FWD and vice versa
1
Note! Suitable work area required!
3
max. 30 cm
Note! Lift the chair in case the wheel chair has an electrical lift.
Relevant article numbers
9002592 M8x12 CKS BZK PRECOTE 85
00000.2003 Locking ring, flat M8
Tools used
Allen key, 6 mm
Icons
2
110648-03-001
4
110648-03-007_FWD_5spaak_2016
Parts need to be replaced. Dispose of waste parts
in accordance with local regulations.
Note! Be aware of the issue!
2
1
| 161
| 161
2
110648-03-902

Advertisement

Table of Contents
loading

This manual is also suitable for:

Puma 40

Table of Contents