Table of Contents
Advertisement
HTC GL 270 HD
4.
Replace the grinding cover with the edge grinding cover and assemble all of the
parts.
Note!
Check that all the parts are correctly attached and that all the screws are
tightened properly before the machine is started.
4.9.2
Fitting the Edge Grinder Adapter
Attach the edge grinding adapter in the order given below. The numbers in Figure 4-7,
page 21
and Figure 4-8,
below:
1.
Remove the locking bolts from the chassis.
Figure 4-7. Attaching the edge grinder adapter, steps 1 - 3
2.
Insert the edge grinder adapter's lower attachment into the chassis.
3.
Fold the edge grinder adapter into the chassis.
2.0
page 22
correspond to the numbers in the procedure
Operation
21
Advertisement
Table of Contents
