Fitting The Edge Grinder Adapter - HTC GL 270 User Manual

HTC GL
270/400/450/550
4.9.2

Fitting the Edge Grinder Adapter

Attach the edge grinding adapter in the order given below. The numbers in
page 23 and
below:
1. Remove the locking bolts from the chassis.
2. Insert the edge grinder adapter's lower attachment into the chassis.
3. Fold the edge grinder adapter into the chassis.
4. Lock the edge grinder adapter in the chassis using the new, longer, locking bolts
that are enclosed with the edge grinder kit.
5. Lock the locking bolts with the safety pins.
Figure 4-7. Attaching the edge grinder adapter, steps 1 - 3
Figure 4-8. Attaching the edge grinder adapter, steps 4 - 5
1.0
Figure 4-8, page 23 correspond to the numbers in the procedure
Usage
Figure 4-7,
23