Access To Grinding Tools; Fitting And Replacing Grinding Tools - HTC 500 Manual

Usage

4.4. Access to grinding tools

Warning!
Always dismantle the weights when you change tools, to prevent
the machine from tipping back.
Warning!
The tool becomes very hot during use. Tip the machine back and
allow it to stand for a short while. Use protective gloves when
removing the tools.
Warning!
Disconnect the electrical supply when changing tools or repairing
the machine.
1.
2.
3.

4.5. Fitting and replacing grinding tools

Warning!
Disconnect the electrical supply, when changing tools or repairing
the machine.
Warning!
The tool becomes very hot during use. Tip the machine back and
allow it to stand for a short while. Use protective gloves when
removing the tools.
18
Set the handle to the rear position - see Figure
4-1 on page 16.
Removing the weights.
Tip the machine backwards carefully so that it rests on the
floor.
HTC 500
1.0