Table of Contents
Advertisement
Introduction
Note!
This symbol means Note! and indicates a potential risk of material damage in
the event of incorrect use of the machine. If you see this symbol next to a
section of text, you must pay particular attention when reading through the text
and not carry out any operations of which you are unsure. This is to avoid
damage to the machine.
Tip!
This symbol means Tips! and implies the inclusion of tips and advice on
effective use of the machine or ways of reducing wear and tear to the machine.
If you see this symbol next to a text, you should read through the text to make
your work easier and to extend the service life of the machine.
1.4
Transportation
Always make sure that the grinder is securely anchored to its surroundings and the
grinding head is lowered against the surface. Make sure that the securing straps, or other
equipment used for anchoring during transport, are tightened over non-moving parts,
e.g. the grinder's chassis.
When lifting the grinder, lifting straps must be used. These must be attached
well-secured in the lifting eyes provided. Only use lifting straps approved for lifting
equipment.
Do not transport the grinder on sloping surfaces, e.g. loading ramps, without securing it
by the lifting eyes for example with a winch. This is a safety measure in case the grinder
starts to roll out of control. Also make sure that people (including operator) in the
vicinity are at a safe distance in order to prevent personal injury, in the event that the
grinder starts to roll out of control.
1.5
On delivery
The following items are included in the delivery. Contact your retailer if anything is
missing.
•
Manual
•
Face spanner (for machines with removable tool holder)
•
Lock spring tool holder
•
Allen key (for machines with adjustable handle)
•
Camlock female
2
HTC GL 270 HD
2.0
Advertisement
Table of Contents
