Table of Contents
Advertisement
Operation
4.
Lock the edge grinder adapter in the chassis using the new, longer, locking bolts that
are enclosed with the edge grinder kit.
Figure 4-8. Attaching the edge grinder adapter, steps 4 - 5
5.
Lock the locking bolts with the safety pins.
4.9.3
Positions for Edge Grinder Adapter
The grinding head can be attached in the right, left or centre position on the edge
grinder adapter. This gives the option to grind edges and corners effectively from
different directions.
Change between left and right position:
1.
Detach the grinding head from the edge grinder adapter.
2.
Slightly loosen the locking knob, see position 1 in Figure 4-9, page 22.
Figure 4-9. Turning the hoop, left - right
22
HTC GL 270 HD
2.0
Advertisement
Table of Contents
