Table of Contents
Advertisement
HTC GL 270 HD
Warning!
Always ensure that the machine's connection cable is hanging freely without
any tensile loading. Otherwise, the cable, coupling socket and plug may be
damaged, which can cause both physical damage and personal injury.
Note!
The machine must be connected to an earth fault breaker suitable for electronic
frequency convertor operation.
Tip!
Check the minimum recommended cable area before using an extension cord.
You will find the recommended cable area under Technical Data.
4.2
Handle setting
The picture below shows the handle positions on the machine.
Figure 4-1. Handle settings
1.
2.0
Upright position - used when tipping the machine to ease access to the
underside of the grinding head, e.g. when changing tools
Operation
13
Advertisement
Table of Contents
