Teo 7810 Network Administration Manual page 60

Teo IP Telephone Network Administration Guide
XML Tag
<tone_type>
tone type
</tone_type>
<control_type>
ringing type
</control_type>
<codec1>
codec type
</codec1>
<codec2>
codec type
</codec2>
<codec3>
codec type
</codec3>
<ptime>
milliseconds
</ptime>
<jitter_buffer_adaptive>
buffer type
</jitter_buffer_adaptive>
<jitter_delay_min>
milliseconds
</jitter_delay_min>
<jitter_delay_max>
milliseconds
</jitter_delay_max>
<jitter_delay>
milliseconds
</jitter_delay>
Page 60
Line Keys
Data / Description
Determines the ringing tone type for a line.
1 – 6, default value = 5
Determines how a line will ring.
ALWAYS (always ring) (default)
NEVER (never ring)
WAIT2
WAIT3
WAIT4
1 st (Preferred) Codec Type:
G711 (default)
G729A
G722
2 nd (optional) Codec Type:
G711
G729A (default)
G722
NONE
3 rd (optional) Codec Type:
G711
G729A
G722 (default)
NONE
The requested packetization time for media
transmission to the phone.
10, 20, 30, 40 milliseconds, default value = 20
Jitter Buffer Type:
ON (adaptive) (default)
OFF (fixed)
Minimum adaptive Jitter Buffer Delay
(only used if jitter_buffer_adaptive is ON):
0 – 280 milliseconds, default value = 10
Maximum adaptive Jitter Buffer Delay
(only used if jitter_buffer_adaptive is ON):
0 – 300 milliseconds, default value = 100
Fixed Jitter Buffer Delay
(only used if jitter_buffer_adaptive is OFF):
10 – 90 milliseconds, default value = 35
WAIT5
WAIT6
WAIT7 (ring after 7 ring cycles)
Note: 1 ring cycle = 6 seconds
13-280132 Rev. Q