Feature Activator Functions - Teo 7810 Network Administration Manual

XML Tag
<max_rph_r_priority>
index
</max_rph_r_priority >
<dscp_mlpp_routine>
routine DSCP
</dscp_mlpp_routine>
<dscp_mlpp_priority>
priority DSCP
</dscp_mlpp_ priority>
<dscp_mlpp_immediate>
immediate DSCP
</dscp_mlpp_ immediate>
<dscp_mlpp_flash>
flash DSCP
</dscp_mlpp_flash>
<dscp_mlpp_override>
flash override DSCP
</dscp_mlpp_override>
<dscp_mlpp_oride_oride>
flash override override DSCP
</dscp_mlpp_oride_oride>
<preempt_held_timeout>
seconds
</preempt_held_timeout>
F e a t u r e A c t i v a t o
F e a t u r e A c t i v a t o
This section defines the list of available features and associated activators/deactivators that
can be assigned to Feature Activator keys (page 61). The features must be supported by the
Call Server platform.
All tags in the following table must be enclosed within the <feature_activator_list>
</feature_activator_list> tag.
13-280132 Rev. Q
MLPP Settings
Sets the maximum priority level the phone is allowed
to call. Calls dialed with a higher priority than the
maximum will be assigned the maximum allowed
priority value.
0 – 9, default value = 2
MLPP Layer 3 DiffServ Voice Packet DSCP Value.
0 – 63
default values:
routine = 49
priority = 47
immediate = 45
flash = 43
flash override = 41
flash override override = 41
When a held call is being preempted, this defines the
amount of time before the held call is cleared.
1 – 24 seconds, default value = 2
r F u n c t i o n s
r F u n c t i o n s
Security Guidelines
Data / Description
Page 53