Teo 7810 Network Administration Manual page 42

Teo IP Telephone Network Administration Guide
XML Tag
<sip_registration>
ON/OFF
</sip_registration>
<sip_reg_exp>
seconds
</sip_reg_exp>
<sip_backup_proxy_addr>
address or name
</sip_backup_proxy_addr>
<sip_backup_proxy_port>
port number
</sip_backup_proxy_port>
<sip_backup_reg_id>
address or name
</sip_backup_reg_id>
Page 42
SIP Settings
Data / Description
Determines if registration with the SIP Registrar is
enabled.
If ON is selected, the phone will determine if an IP
address is available for the SIP Registrar; if so, it will
attempt to register with it.
If OFF is selected, registration is not attempted.
ON (default)
OFF
The number of seconds that the registration is valid
before the phone must re-register with the SIP Proxy.
Valid range is 10 to 7200 seconds (10 seconds to 2
hours) in the form xxxx with leading zeros
suppressed.
default value = 3600 (1 hour)
IP address or server name of the SIP Backup Server or
Redundant SIP Proxy.
address or name is the default address in IPv4 or
IPv6 format or DNS fully-qualified domain name.
If <sip_proxy_addr source= DHCP4> the address will be
provided by DHCP Option 120, if available.
Port number used by the phone to send SIP signaling
messages, in the form xxxxx with leading zeros
suppressed.
1025 – 65534, default value = 5060
IP address or domain name of the SIP Registrar when
the Backup Proxy Server is used (most server
implementations combine this into a single SIP server
application).
If left blank or omitted, <sip_backup_proxy_addr> will
be used. This value is used inside SIP message
headers, in the form <line_id>@
<sip_backup_reg_id>:<sip_backup_reg_port>, to
reference the SIP server (e.g. 1000@192.168.72.5:5060
or 1000@teo:5060).
13-280132 Rev. Q