Teo 7810 Network Administration Manual page 38

Teo IP Telephone Network Administration Guide
XML Tag
<sip_attmpt_b4_backup>
unsuccessful transmissions
</sip_attmpt_b4_backup>
<sip_retry_reg_timer>
seconds
</sip_retry_reg_timer>
<session_refresher>
entity
</session_refresher>
<session_timer>
keep alive
</session_timer>
<session_timer_min>
seconds
</session_timer_min>
<session_timer_interval>
seconds
</session_timer_interval>
<sip_refresh_use_update>
ON/OFF
</sip_refresh_use_update>
<phone_context>
context string
</phone_context>
Page 38
SIP Settings
Data / Description
The number of unsuccessful transmissions before the
phone switches to the Backup Proxy Server in the
form xx with leading zeros suppressed.
2 to 10, default value = 8
The number of seconds between SIP registration
retries.
Valid range is 1 to 65535 seconds (1 second to18.2
hours) in the form xxxxx with leading zeros
suppressed.
default value = 30
The entity that refreshes the SIP session.
NONE
LOCAL
REMOTE
ANY (default)
Session timer keep alive mechanism is described in
RFC 4028.
REQUIRED
SUPPORTED
UNSUPPORTED (default)
The minimum value that the phone will accept for the
session. This value cannot be larger than the
<session_timer_interval>.
Valid range is 90 to 2,147,483,647 seconds (1.5
minutes to 68 years) with leading zeros suppressed.
default value = 90
The maximum amount of time that can occur
between session refresh requests in a dialog before
the session will be considered timed out.
Valid range is 90 to 2,147,483,647 seconds (1.5
minutes to 68 years) with leading zeros suppressed.
default value = 3600 (1 hour)
Enables the use of SIP UPDATE method for session
refreshes.
ON
OFF (default)
Defines the default phone-context to be used when
calling local numbers when the SIP URL type is "tel".
The default setting is a zero length string.
13-280132 Rev. Q