Nokia Customer Care
Updating JBV-1 docking station software
Before you begin
The JBV-1 docking station contains software (firmware) which can be updated. You need the following
equipment to update the software:
• PC with USB connection
• operating system supporting USB (Not Win 95 or NT)
• USB Cable (can be purchased from shops or suppliers providing PC hardware and accessories)
• JBV-1 docking station
• external power supply (11-16V)
Before installation:
Jbv1_18_update.zip file to your computer (in C:\TEMP for example) from your download web
• Download
site.
• Close all other programs.
• Follow instructions on the screen.
Context
The JBV-1 docking station is a common tool for all DCT-4 generation products. In order to make the JBV-1
usable with different phone models, a phone-specific docking station adapter is used.
Steps
Jbv1_18_update.zip file and start software installation by double clicking Setup.exe .
1.
Run
Note:
DO NOT CONNECT THE USB CABLE/JBV-1 TO YOUR COMPUTER YET!
Files needed for JBV-1 package setup program will be extracted.
Page 3 –38
Figure 63 Extracting JBV-1 update files
COMPANY CONFIDENTIAL
Copyright © 2005 Nokia. All rights reserved.
RM-82
Phoenix service SW
Issue 1