Nokia 6111 RM-82 Service Manual page 141

RM-82
Troubleshooting for Repair service
Figure 87 Auto tuning concept with RX and TX tuning devices and splitter
Copy the two phone specific ini-files, for example
specific folder, for example
Steps
1. Make sure the phone (in the jig) is connected to the equipment. Else, some menus will not be shown in
Phoenix.
2. The first time you are using automatic tuning on this phone model, on this computer, you will have to
Set loss for cables and jigs.
3. To go to autotune, select
4. If you need more assistance, please refer to the Phoenix
Issue 1
\Phoenix\products\RM-13\ .
Tuning (Alt-U) > Auto-Tune (Alt-A) from the menu.
COMPANY CONFIDENTIAL
Copyright © 2005 Nokia. All rights reserved.
rm_13_tunings.ini and autotune_RM-13.ini, to a phone
Help .
Nokia Customer Care
Page 6 –13