Nokia Customer Care
JBV-1 Docking Station
The JBV-1 connects flash prommers. The docking station can be powered by the FPS-8
Flash Prommer or by an external power supply.
MJ-57 Module Jig
The MJ-57 is used as a means to secure the PWBs and displays for troubleshooting with
the covers off. The design provides DC power input and a communication port for the
service software. In addition, the MJ-57 provides a secure way of connecting RF cables
for testing and tuning. The CA-56RS cable is required for RF testing.
Note: The MJ-57 Module Jig's flex PWB is sold as a separate spare part.
Note: The CA-56RS cable is not included in the MJ-57 sales package. When the cable
is attached to the MJ-57 jig and the PWB is inserted, make sure to press the PWB
into place to ensure good contact with the cable.
PCS-1 Power Cable
The PCS-1 is used to connect the service tools (e.g., JBV-1 Docking Station, MJ-57
Service Jig) to an external power supply.
ISSUE 1 07/2005
©2005 Nokia Corporation
3155/3155i (RM-41), 3152 (RM-61)
Company Confidential
Service Tools
Page 7