Placement Instruction For Emc Label Grounding Copper - Nokia 6111 RM-82 Service Manual

RM-82
Nokia Customer Care Disassembly and reassembly instructions
6. Use tweezers to place the domesheet in the correct position on the engine module. (Note the guidelines!)
7. When the domesheet is at the right position, fix it holding your finger on the engine module.
8. Check the correct position of the domesheet.

Placement instruction for EMC label grounding copper

Steps
1. Place the engine module into the RJ-98 soldering jig.
Page 5 –18 COMPANY CONFIDENTIAL Issue 1
Copyright © 2005 Nokia. All rights reserved.