RM-82
Phoenix service SW
Nokia Customer Care
You have now updated the software of your JBV-1 docking station and it is ready for use.
Next action
If you have several docking stations you need to update, disconnect the power and USB cables from the
previous one and connect them to the next docking station. First, click Refresh Status to see the current SW
version and then Update Firmware to update the software.
JBV-1 Firmware Update dialog box.
After you have updated all docking stations, close the
Issue 1
COMPANY CONFIDENTIAL
Page 3 –43
Copyright © 2005 Nokia. All rights reserved.