Nonin G02 ARCHIEVE User Manual page 8

Cautions
!
• The GO Achieve might misinterpret excessive movement as good pulse strength. Limit
2
finger movement as much as possible when using the device.
• The GO Achieve must be able to measure your pulse properly to give you an accurate
2
reading. Do not put the device on the same hand/arm when using a blood pressure cuff or
monitor.
• The GO Achieve has no alarms. It will not sound if the amount of oxygen in your blood is
2
low or if your pulse rate is too high or too low.
• Do not place the GO
chloride, isopropyl alcohol, or products that are not listed in this User's Guide.
• Any of the following conditions may reduce the performance of the GO
– flickering or very bright light;
– weak pulse quality (low perfusion);
– low hemoglobin;
– arterial catheters;
– nail polish, and/or artificial nails; and
– any tests recently performed on you that required an injection of intravascular dyes.
5
Achieve in liquid or clean it with agents containing ammonium
2
Achieve:
2