Marani CLP-2600 User Manual page 35

Ratio page – from this page it is possible to set the
Once pushing ENTER the
PM3 encoder the
Hard/Soft Knee : the selectable range of the
up to 100% (Soft) by steps of 1 .
Drive page from this page it is possible to set the
which is useful for modifying the level of the Compressor input signal .
Once pushing ENTER the
PM3 encoder the
Drive : the selectable range of the RMS Compressor's Drive is from -12dB up to +6dB by steps
of 0.5dB .
OutGain page – from this page it is possible to set the Output Level
Once pushing ENTER the
PM3 encoder the
OutGain : the selectable range of the
steps of 0.5dB .
Note: The OutGain parameter can be used to compensate somehow the Drive effect and vice
versa.
RMS Compressor 's Knee editing page
Ratio parameter can be set:
OutputA Left
->Knee Soft-Hard = 0%
RMS Compressor 's Knee editing page
Ratio parameter can be set:
OutputA Left
->Drive = +0.0dB
RMS Compressor 's Knee editing page
Output Level parameter can be set:
OutputA Left
->OutGain = +0.0%
RMS Compressor 's Drive is from -12dB up to +6dB
Knee
Cmp1
RMS Compressor's Knee type is from 0% (Hard)
Drive parameter of the RMS Compressor,
Cmp1
Cmp1
33
type of the RMS Compressor.
can be entered and using the
can be entered and using the
of the RMS Compressor.
can be entered and using the
by