Advertisement
For example, if we want to delete the preset 10,
following:
Confirming the deletion by pressing
selected preset and the following transitory screen will appear:
Once the preset is deleted, the above screen will disappear returning to the following screen:
Where
Preset 01
Note: At any time it is possible to quit the deleting action by pressing the
Interface Utilities Sub-menu
[USB or RS485] to be used for controlling the CLP2600 :
.
Interface Utilities , press
From
Interface Setup: this screen allows you to choose the remote control protocol for the
CLP2600.
By pressing ENTER
possible interfaces (USB or RS485) for the CLP2600.
Pressing ENTER on a selected source will make an asterisk appear to the right of the
description on the LCD as in the following example which shows the selected interface as USB.
[ENTER] for Delete.
10: Light Comp 3b
Wait: Deleting......
10: Light Comp 3b
Multi-Band Compressor
Preset 01
is the currently running Preset.
this sub-menu allows you to define the remote control interface
UTILITY MENU:
Interface Utilities
ENTER
INTERFACE UTILITY:
Interface Setup
and then using the PM2 or PM3 encoder you can choose between the two
Interface Setup
Source: USB
Light Comp 3b
ENTER
again, will force the CLP2600 to erase the
to access the Interface Setup.
14
, the screen will be the
ESC
button.
Advertisement
