Advertisement
Save a Program: this page allows you to store a new preset in the CLP2600's memory:
By pressing the ENTER button and rotating the
the previously saved presets and the available empty locations (identified by
Memory ).
If no user presets are stored, the Save a Program
for all 1-2 0 presets as shown in the example below for location 10:
When storing an edited configuration for the CLP2600, select the location for a preset from the
20 available by using the
Once the desired location appears on the screen press ENTER again to reach the
Preset
page.
In this page the User can enter a Preset Name (up to 16 Characters) by using the
encoder to choose a character and the
locations for the character s positioning.
The current position of the cursor is shown by a
The following is an example of a screen while entering the preset name
location 10:
To store the Preset Name press the
The above action will take you to the
the preset and the final edited name:
Pressing
ENTER
and the following transitory screen will appear on the LCD:
PROGRAM UTILITY:
Save a Program
Save a Program
10: Program
PM3 encoder.
Save a Program
10: Light Comp 3b
ENTER
Enter to Save
[Enter] to Save
10: Light Comp 3b
again, will store the preset in the selected location with the chosen name
Saving to Memory.....
10: Light Comp 3b
PM3
encoder, it is possible to scroll through
screen will show empty memory locations
NAV/PM1
encoder to move between the 16 available
blinking underscore .
button again.
page showing the selected location for
12
Empty
Edit Name
PM3
Light Comp 3b
in
Advertisement
