Connecting Usb Devices ([Usb To Device] Terminal) - Yamaha Tyros5-76 Owner's Manual

Connecting USB Devices ([USB TO DEVICE] terminal)

You can connect a USB flash memory or a USB wireless LAN adaptor to the [USB TO DEVICE] terminal. You can save
data you've created on the instrument to the USB flash memory (page 29), or you can connect the instrument to a smart
device such as iPad via wireless LAN (page 102).
Precautions when using the [USB TO DEVICE] terminal
When connecting a USB device to the terminal, be sure to handle the USB device with care. Follow the important pre-
cautions below.
NOTE
For more information about the handling of USB devices, refer to the owner's manual of the USB device.
 Compatible USB devices
• USB flash memory
• USB wireless LAN adaptor (which is included only in
some areas)
Other USB devices such as a computer keyboard or
mouse cannot be used.
The instrument does not necessarily support all commer-
cially available USB devices. Yamaha cannot guarantee
operation of USB devices that you purchase. Before pur-
chasing a USB device for use with this instrument, please
visit the following web page:
http://download.yamaha.com/
NOTE
The rating of the [USB TO DEVICE] terminal is a maximum of 5V/500mA. Do
not connect USB devices having a rating above this, since this can cause
damage to the instrument itself.
 Connecting USB device
When connecting a USB device to the [USB TO
DEVICE] terminal, make sure that the connector on the
device is appropriate and that it is connected in the proper
direction.
NOTICE
• Avoid connecting or disconnecting the USB device during play-
back/recording, file management (such as Save, Copy, Delete
and Format operations) or when accessing the USB device.
Failure to do so may result in "freezing" of the operation of the
instrument or corruption of the USB device and the data.
• When connecting then disconnecting the USB device (and vice
versa), make sure to wait a few seconds between the two oper-
ations.
NOTE
When connecting a USB cable, make sure that the length is less than 3
meters.
 Using USB flash memory
By connecting a USB storage device to the instrument,
you can save data you've created to the connected USB
flash memory, as well as read data from the connected
USB flash memory.
 Formatting USB flash memory
When a USB storage device is connected, a message may
appear prompting you to format the USB flash memory.
If so, execute the Format operation (page 102).
NOTICE
The Format operation deletes any previously existing data. Make
sure that the USB flash memory you are formatting does not con-
tain important data. Proceed with caution, especially when con-
necting multiple USB flash memories.
 To protect your data (write-protect)
To prevent important data from being inadvertently
erased, apply the write-protect function provided with
each USB flash memory. If you are saving data to the
USB storage device, make sure to disable write-protect.
 Turning off the instrument
When turning off the instrument, make sure that the
instrument is NOT accessing the USB flash memory by
playback/recording or file management (such as during
Save, Copy, Delete and Format operations). Failure to do
so may corrupt the USB flash memory and the data.
Tyros5 Owner's Manual
11
101