Entering Characters - Yamaha Tyros5-76 Owner's Manual

Entering Characters

This section covers how to enter characters for naming your files/folders, inputting keywords on Music Finder (page 81),
etc. Entering characters should be done in the display shown below.
Character Entry window
1
1
Change the type of character by pressing the [1 ] button.
• CASE ...................capital letters, numbers, marks
• case.......................lowercase letters, numbers, marks
2
Use the [DATA ENTRY] dial to move the cursor to the desired
position.
3
Press the [2 ]–[6 ] and [7 ] buttons, corresponding to
the character you wish to enter.
Several different characters are assigned to each button, and the characters change
each time you press the button.
To actually enter the selected character, move the cursor or press another charac-
ter-input button. Alternately, you can wait for a short time and the characters will
be entered automatically.
For more information on entering characters, refer to "Other character-entry oper-
ations" below.
4
Press the [8 ] (OK) button to actually enter the name and
complete the operation (such as Save and Rename).
Other character-entry operations
 Deleting characters
Move the cursor to the character you wish to delete by using the [DATA ENTRY] dial, and
press the [7 ] (DELETE) button. To delete all characters on the line at once, press and
hold the [7 ] (DELETE) button.
 Entering symbols or space
Press the [6 ] (SYMBOL) button to call up the list.
1
2
Use the [DATA ENTRY] dial to move the cursor to the desired symbol or space, then
press the [8 ] (OK) button.
 Selecting custom icons for files (shown at left of file name)
1 Press the [1 ] (ICON) button to call up the ICON SELECT display.
2 Select the icon by using the [A]–[J] buttons, [3 ]–[5 ] buttons or [DATA
ENTRY] dial. The display includes several pages. Press the TAB [][] buttons to
select different pages.
3 Press the [8 ] (OK) button to apply the selected icon.
34
Tyros5 Owner's Manual
2 3
4
NOTE
The following marks cannot be entered
for a file/folder name.
\ / : * ? " < > |
NOTE
File names can contain up to 41 charac-
ters and folder names can contain up to
50 characters.
NOTE
To cancel the character-entering opera-
tion, press the [8 ] (CANCEL) button.
NOTE
To cancel the operation, press the
[8 ] (CANCEL) button.